Yamaha HDW-730 Camcorder User Manual


 
4
Chapter 4 Adjustments and Settings for Recording 4-3
During adjustment, the following message is displayed on the viewfinder
screen.
The black balance adjustment ends in a few seconds with the message
“BLACK:OK” and the adjustment setting is automatically stored in
memory.
Notes
During the black balance adjustment, the iris is automatically closed.
During the black balance adjustment, the gain selection circuit is
automatically activated so you may see flickering on the viewfinder
screen, but this is not a fault.
The messages change in
the following sequence :
-BLACK SET-
-BLACK BAL-
1)
-CHECK-
....................................................................................................................................
1) If the existing black balance adjustment is satisfactory, the message “BLACK
BAL” may not appear, that is, the automatic black balance adjustment may be
omitted to save time.