Filter
Top Products
4
Chapter 4 Adjustments and Settings for Recording4-22
The AUTO IRIS page appears.
3 Turn the MENU knob to move the t mark to IRIS OVERRIDE.
The t mark at the left of the selected item changes to a z mark
and the z mark at the left of the setting changes to a ? mark.
4 Turn the MENU knob until ON appears, then push the MENU knob.
The z mark at the left of the selected item changes to a t mark
and the ? mark at the left of the setting changes to a z mark.
The IRIS OVERRIDE is set to ON.
5 Set the MENU ON/OFF switch to OFF. Or close the cover of the
Menu Operating section.
The AUTO IRIS page disappears from the viewfinder.
6 Turn the MENU knob to change the reference value.
Note
Be sure to confirm that the shutter speed is set to any mode other
than ECS.
The changed reference value is retained until the power of the
camcorder is turned off.
Even if the reference value is changed, it reverts to the standard
value every time the power is turned on. The reference value is
normally set to the standard value.