Filter
Top Products
3
Chapter 3 Recording and Playback 3-3
Notes
• To insert the tape correctly, make sure to stand the grip of the
camcorder.
• When inserting the tape, be careful that you don’t hit the tape against
the tape holder.
Checking the tape for slack
Pressing in the reels lightly, turn them gently with your fingers in the
directions shown below. If the reels will not move, there is no slack.
Checking the tape for slack
Unloading a cassette
With the power supply on, press the EJECT button to open the cassette
lid. Then take out the cassette. If you are not going to insert another
cassette, close the cassette lid.
It is possible to take out the cassette and close the cassette lid unless the
battery voltage drops below about 10.5 V. Do not repeat this unloading
operation.