Filter
Top Products
4
Chapter 4 Adjustments and Settings for Recording 4-73
4-7-3 Display Mode and Setting Change and
Adjustment Progress Messages
You can limit or suppress the messages that give details of setting
changes and adjustment progress and results by setting a display mode.
The conditions under which messages are displayed and their
correspondence with the display mode are as follows:
Setting change and adjustment progress messages and display modes
Y: Message is displayed.
N: Message is not displayed.
Message
display condition
When the filter selection
has been changed
When the gain setting has
been changed
When the setting of the
WHITE BAL switch has
been changed
When the OUTPUT/DCC
selector has been set to
DCC ON or OFF
When the shutter speed
and mode setting has been
changed
a)
Message
FILTER : n (where n = 1, 2, 3, 4)
GAIN : n (where n = –3dB, 0dB,
3dB, 6dB, 9dB,12dB, 18dB,
24dB, 30dB, 36dB, 42dB)
WHITE : n (where n = A CH, B
CH, PRESET) or ATW : RUN
DCC : ON (or OFF)
: SS : 1/100 (for the 59.94I or
25PsF format model), 1/60 (for
the 50I or 25PsF format model),
or 1/33 or 1/50 (for 25PsF
format model) (or 1/125, 1/250,
1/500, 1/1000, 1/2000, ECS,
EVS)
Display mode
setting
123
NNY
NNY
NNY
NYY
NYY
(Continued)