Yamaha HDW-730 Camcorder User Manual


 
A
Appendix A-37
Page Items Setting Contents
BATTERY BEFORE 11.0 to
(Continued)
END 3 13.0V (in
0.1V
steps)
END3 10.5 to
11.5 V (in
0.1V
steps)
VTR MODE-1 VIDEO (F/R) EE/PB
OUT
(FF/REW)
AUDIO (F/R) CUE/EE
OUT
(FF/REW)
REC AUDIO EE/SAVE
OUT
CAMERA ENABL/
ADAPTOR DSABL
Used when a battery pack
other than a BP-M50/M100/
L60A or an external power
connected to the DC IN
connector is used. Sets the
voltage warning level just
before the battery ends.
Used when a battery pack
other than a BP-M50/M100/
L60A or an external power
connected to the DC IN
connector is used. Sets the
voltage level at which the
battery ends and the
camcorder stops operation,
just before the battery ends.
Selects the video output
signal during FF/REW.
Selects the audio output
signal during FF/REW.
Selects the audio output
signal during recording.
Selects whether the camera
adaptor is enabled to use or
not enabled.
ENABL: Camera adaptor can
be used.
DSABL: Camera adaptor
cannot be used.