Yamaha HDW-750 Camcorder User Manual


 
1
Chapter 1 Overview1-6
Four channels of analog audio can be converted to 20-bit digital
signals. The converted four channels of digital audio can then be
recorded.
Connecting an HDCA-901 camera adaptor (not supplied) allows the
input of four audio channels. This also makes it possible for the HD-
SDI signal to be output.
When connecting the audio cable to AUDIO IN CH-1/CH-2 connectors
(XLR 3-pin), the audio signals input to the XLR 3-pin are recorded
regardless of the AUDIO IN switch setting. This function is called the
XLR connection automatic detection function.
The AUDIO OUT connector (XLR 5-pin) allows the camcorder to
output signals from two channels at the same time (stereo recording).
The camcorder searches for the most recently recorded cut and records
the new cut over it. (RE-TAKE function)
The camcorder searches for the point most recently recorded on the
tape and automatically switches to paused recording mode (rec pause).
(End Search function)
The camcorder can record GPS data with the video data on the tape.
(This feature is available when an HKDW-704 GPS UNIT is attached.)