Filter
Top Products
4
Chapter 4 Adjustments and Settings for Recording4-74
Message
display condition
When the black or white
balance has been adjusted
a) This is also displayed for about 3 seconds when the SHUTTER selector is set to
ON.
Changing the display mode
The currently set display mode appears on the VF DISP 1 page of the
USER menu. Follow the procedure below to change it.
1 Follow steps 1 to 2 in “4-7-2 Selecting the Display Items” (page
4-70), until the VF DISP 1 page of the USER menu is on the
viewfinder screen.
2 Turn the MENU knob to move the t mark to VF DISPLAY
MODE, and push the MENU knob.
The t mark at the left of the selected item changes to a z mark
and the z mark at the left of the setting changes to a ? mark.
3 Turn the MENU knob until the desired display mode appears, and
push the MENU knob.
The z mark at the left of the selected item changes to a t mark
and the ? mark at the left of the setting changes to a z mark.
4 To end menu operations, set the MENU ON/OFF switch to OFF, or
close the cover.
Message
E.g. WHITE : OK
For more information, see
Section “4-1 Adjusting the Black
Balance and the White Balance”
(page 4-1).
Display mode
setting
123
NYY