Filter
Top Products
4
Chapter 4 Adjustments and Settings for Recording4-72
VF DISP 2 page
Item Contents
DISP ZOOM Zoom position indicator
DISP COLOR TEMP Displays the color temperature.
DISP VOLT
a)
Displays the battery voltage of an internal
battery pack or an external battery connected
to the DC IN connector.
DISP DC IN Displayed when the power is supplied from an
external battery connected to the DC IN
connector.
DISP WRR RF LVL Displays the reception level of the wireless
microphone.
DISP TIME CODE Displays the time code.
a) When an Anton Bauer Intelligent Battery System or the BP-M50/M100
battery pack is used, the remaining battery capacity of those batteryt is
displayed as a percentage when DISP VOLT is set to OFF.
3 Turn the MENU knob to move the t mark to the item you want to
set, and push the MENU knob.
The t mark at the left of the selected item changes to a z mark
and the z mark at the left of the setting changes to a ? mark.
4 Turn the MENU knob whether the selected item should appear in
the viewfinder display (the “ON” setting), or not appear (the “OFF”
setting), and push the MENU knob.
The z mark at the left of the selected item changes to a t mark
and the ? mark at the left of the setting changes to a z mark.
Note that pushing the CANCEL/PRST / ESCAPE switch to
CANCEL/PRST on this page has no effect.
5 To turn the setting of another item ON or OFF, repeat steps 3 and 4.
6 To end menu operations, set the MENU ON/OFF switch to OFF, or
close the cover.