Filter
Top Products
3
Chapter 3 Recording and Playback 3-19
1 Turn the MENU knob to move the t mark to the marker to be
set.
2 Turn the MENU knob clockwise or counter clockwise until the
desired setting appears.
To record the marker to the tape, select ON.
To not record the marker, select OFF.
3 Push the MENU knob.
4 Perform settings of the remaining markers repeating steps 1,
2 and 3.
9 To end the menu opration, set the MENU ON/OFF switch to OFF,
or close the cover.
The menu disappears from the viewfinder screen and the display
indicating the current status of the camcorder appears along the top
and bottom of the viewfinder.
Recording a shot marker 1
Press the RET button once. On the viewfinder screen, “z” and the time
code of the marked point are displayed for about 3 seconds.
Recording a shot marker 2
Press the RET button twice. On the viewfinder screen, “X” and the time
code of the marked point are displayed for about 3 seconds.