Filter
Top Products
Chapter 6 Maintenance
6
6-9
(6) Checking the XLR connection automatic detection
function
Before starting to check, remove the microphone connected to the MIC
IN connector if it is connected.
1 Perform operations of steps 1 and 2 explained in “(5) Testing
external microphones”.
2 Set the AUDIO IN switches to FRONT.
3 Perform operations of steps 4 and 5 explained in “(5) Testing
external microphones”.
When performing the operation of step 5 in “(5) Testing external
microphones”, if the audio level meters in the display panel and
audio level indicators in the viewfinder reflect the changing sound
level, the function of the XLR connection automatic detection works
correctly.
If it does not reflect the changing sound level, the function of the
XLR connection automatic detection is set to OFF. Set REAR XLR
AUTO to ON on the VTR MODE 1 page of the MAINTENANCE
menu.
If it does not reflect even after you set REAR XLR AUTO to ON,
the XLR connection automatic detection function does not work
correctly.
(Continued)