Yamaha HDW-750 Camcorder User Manual


 
1
Chapter 1 Overview
1-8
Audio signal source
External microphone
C-74, etc.
Audio equipment
WRR- 810A/860A/862A/
862B UHF Portable Tuner
Power source
AC power
supply
c)
Battery
BP-L60A/
M50/M100
Battery Pack
HDCA-901 for the input of
the audio channels 3 and
4 and the HD-SDI output
Camera adaptor
CAC-12 Microphone
Holder
WRR-855A/855B slot-
in UHF portable tuner
CCXA-53 audio cable
Lens assembly
b)
(2.8 D to +2.0 D)
(Part No. A-8262-537-A)
Lens assembly
b)
(3.6 D to 0.8 D)
(Part No. A-8262-538-A)
Lens assembly
b)
(3.6 D to +0.4 D)
(Part No. A-8267-737-A)
Lens assembly
b)
(3 × magnification)
(2.4 D to +0.5 D)
(Part No. A-8314-798-A)
AC-DN2B
AC Adaptor
AC-550/
550CE
AC Adaptor
For more information about the fittings, connections, or use of additional
equipment and accessories, see Chapter 5 as well as the operation manuals for
the connected equipment.
BC-L120/M50
Battery
Charger
1-3 Example of System Configuration
Viewfinder-related equipment
Video monitor for
color image check
while shooting
Remote controll
equipment
RM-B150 Remote
Control Unit
Fog-proof filter
(Part No. 1-547-341-11)
BKW-401 Viewfinder
Rotation Bracket
BKDW-701
Servo filter unit
Extension
board
HKDW-703 for
picture cache
HKDW-702
a)
for
converting the signal
to 525i/625i signal
HKDW-704 for
recording the GPS
data
Memory Stick
The diagram below shows a typical configuration of the camcorder for
ENG and EFP.
a) Be sure to attach the HKDW-702/1 or higher to the HDW-730/750P.
b) For more information, see “Viewfinder and related equipment” on page A-7.
c) 120 V AC or 220 to 240 V AC