Filter
Top Products
5
Chapter 5 Setting Up the Camcorder 5-33
5-8 Adjusting the Shoulder
Pad Position
You can shift the shoulder pad from its center position (factory setting)
backward by up to 10 mm (3/8 inch) or forward by up to 25 mm (1 inch).
This adjustment helps you get the best balance for shooting with the
camcorder on your shoulder.
Adjusting the shoulder pad position
1 Loosen the two screws.
2 Slide the shoulder pad backward or forward until it is in the most
convenient position.
3 Tighten the screws.
Note
Do not remove screws instead of loosening them. If you have removed
them, be sure to use the screws you removed, or screws of the same
length (8 mm). If you fasten the shoulder pad using longer screws, they
may damage parts inside the unit.
Shoulder pad
Bottom