Filter
Top Products
100
DV Dubbing
You can input video from other digital video devices via the DV terminal, and record the
input video on the tape in the camcorder. You can also record the input video as a movie
or still image on a memory card.
Connecting
Check the direction before connecting the DV cable. Refer also to the instruction manual
of the connected device.
Dubbing
1. Set the camcorder to
PLAY(VCR)•
mode and load a blank cassette.
If “AV DV” is displayed, change the setting ( 66).
2. Connected device: Load the recorded cassette.
3. Press the REC PAUSE button.
4. Connected Device: Play back the tape.
You can check the picture on the camcorder’s screen.
5. Press the / button when the scene you wish to record appears.
Recording starts.
6. Press the button to stop recording.
• Press the / button to pause recording.
• Press the / button again to restart recording.
7. Connected Device: Stop playback.
Recording the Input Video on a Memory Card
The size of the still image recorded on the memory card will be 640 x 480. The still image
quality and the movie size can be selected.
1. Set the camcorder to
PLAY(VCR)•
mode.
• If a cassette is loaded, make sure that the tape is stopped.
• If “AV DV” is displayed, change the setting ( 66).
2. Selecting the still image quality:
Press the FUNC. button. Select the still image quality symbol followed
by a setting option and press the FUNC. button.
Selecting the movie size:
Signal flow
Commercially available DV cable
Digital video device
(e.g. camcorder)
OPTURA 600_NTSC-E.book Page 100 Friday, June 3, 2005 9:27 AM