Filter
Top Products
104
Audio Dubbing
You can add sound from audio devices (AUDIO IN) or with the built-in or an external
microphone (MIC. IN).
This function is operated with the wireless controller.
Connecting
Connecting an Audio Device
Refer also to the instruction manual of the connected device.
Connecting a Microphone
See Recording with an External Microphone (51).
Dubbing
1. Set the camcorder to
PLAY(VCR)•
mode and load a recorded cassette.
Use a tape recorded in SP, 12-bit mode with this camcorder.
2. Press the MENU button and select [AUDIO SETUP]. Select [AUDIO
DUB.], set it to [AUDIO IN] or [MIC. IN] and press the MENU button.
3. Play back the tape.
4. When the scene you wish to dub appears press the PAUSE button
on the wireless controller.
5. Press the AUDIO DUB. button on the wireless controller.
“AUDIO DUB.” and “ ” appear.
6. Press the PAUSE button on the wireless controller to begin
dubbing.
• Audio device: Begin playback.
• Microphone: Speak into the microphone.
7. Press the STOP button on the wireless controller to stop dubbing.
Audio device: Stop playback.
MENU
(64)
AUDIO SETUP AUDIO DUB.
AUDIO
R
L
Signal flow
MTC-100 Multi
Cable (Supplied)
Audio device
(e.g. CD player)
OPTURA 600_NTSC-E.book Page 104 Friday, June 3, 2005 9:27 AM