Filter
Top Products
39
Basic Functions
Playback
E
Playing Back on a TV Screen
Refer also to the TV or VCR instruction manual.
1. Turn off all devices before starting the connections.
2. Open the terminal cover and connect the camcorder to the TV/VCR
using the MTC-100 Multi Cable.
• When connecting to a TV with an S (S1)-video input terminal: Connect the black
plug to the S-video terminal, the white plug to the white audio terminal L (left) and
the red plug to the red audio terminal R (right). Do not connect the yellow plug.
• When connecting to a TV with Audio/Video terminals: Connect the white plug to the
white audio terminal L (left), the red plug to the red audio terminal R (right) and the
yellow plug to the yellow video terminal VIDEO.
3. If connecting to a TV, set the input selector to VIDEO. If connecting to
a VCR, set the input selector to LINE.
4. Play back a tape ( 35) or a memory card ( 37).
We recommend powering the camcorder from a household power source.
The picture quality is higher when connecting to a TV with an S (S1) terminal.
VIDEO
S(S1)-VIDEO
INPUT
AUDIO
R
L
VIDEO
INPUT
AUDIO
R
L
MTC-100
Multi Cable
(Supplied)
TVs with S (S1)-Video
Input Terminal
TVs with Audio/Video
Terminals
Signal flow
OPTURA 600_NTSC-E.book Page 39 Friday, June 3, 2005 9:27 AM