Filter
Top Products
88
Selecting the Drive Mode
1. Set the camcorder to
CAMERA•
mode.
2. Set the mode dial to a mode other than .
3. Press the DRIVE MODE button to switch between the drive modes.
The setting changes with each press of the button.
4. Press the PHOTO button halfway.
5. Continuous Shooting/High-Speed Continuous Shooting: Press and
hold the PHOTO button fully.
A series of still images will be recorded as long as you hold the PHOTO button.
Auto Exposure Bracketing: Press the PHOTO button fully.
Three still images in different exposures are recorded to the memory card.
(Single)
Records a single still image when you press the PHOTO
button.
(Continuous Shooting)
Captures a quick series of still images while you press the
PHOTO button. For the number of frames per second,
refer to the table on the next page.
(High-Speed Continuous
Shooting)
(AEB (Auto Exposure
Bracketing))
The camcorder records a still image in three different
exposures (dark, normal, light in 1/2 EV steps), allowing
you to choose the perfect exposed shot.
PHOTO button
DRIVE MODE button
Mode dial
OPTURA 600_NTSC-E.book Page 88 Friday, June 3, 2005 9:27 AM