Filter
Top Products
35
Basic Functions
Playback
E
Playback
Playing Back a Tape
1. Press the small button and set the
POWER switch to PLAY (VCR).
2. Set the TAPE/CARD switch to .
3. Press the button to rewind
the tape.
4. Press the / button to begin
playback.
5. Press the button to stop
playback.
To use the viewfinder, close the LCD panel.
About the screen display: During playback, the time code gives the hours,
minutes, seconds and frames. The remaining tape time may not appear when
the time left is less than 15 seconds.
To display the audio level at the time of recording, press the AUDIO LEVEL
button during playback.
If the playback picture is distorted, clean the video heads using a Canon Head Cleaning
Cassette or a commercially available digital video head-cleaning cassette ( 137).
OPTURA 600_NTSC-E.book Page 35 Friday, June 3, 2005 9:27 AM