Filter
Top Products
131
Trouble?
E
Direct Print Related Messages
Following messages may appear on the camcorder screen. Refer also to the printer
manual for remedies corresponding to the error messages.
Canon PIXMA/SELPHY DS printer:
Make sure to refer to the printer’s manual in the following cases:
- When the error indicator on the printer flashes.
- Printers equipped with an operation panel and printers that can be connected
to a TV: When an error number or error message is displayed on the panel or
TV monitor.
If the error persists, consult your dealer or a Canon Service Center listed in the
Contact List provided with the printer or the printer’s manual.
CARD FULL No remaining capacity on the memory card. Replace with another
card or erase images.
–
NAMING ERROR The folder and image numbers have reached their maximum
value.
69
UNIDENTIFIABLE
IMAGE
Image is not recorded with JPEG compression, or with a
compression not compatible with the camcorder, or the image file
is corrupted.
–
PRINT ORDER
ERROR
You attempted to set more than 998 still images in the print order. –
TRANSFER ORDER
ERROR
You attempted to set more than 998 transfer orders. 124
CANNOT TRANSFER! You attempted to transfer a movie file as wallpaper. 122
THIS IMAGE CANNOT
BE RECORDED
Some analog images cannot be recorded on the memory card
depending on the signal.
–
NOW CREATING START-
UP IMAGE
The start-up image is being made. –
THIS IMAGE CANNOT
BE USED AS START-UP
IMAGE
You attempted to use an image recorded with another camcorder,
recorded with a compression not compatible with this camcorder,
or that has been edited on a computer.
75
TOO MANY STILL
IMAGES DISCONNECT
USB CABLE
Disconnect the USB cable, decrease the number of still images on
the memory card to less than 1800. If a dialog appeared on the
computer screen, close it. Reconnect the USB cable.
–
Message Explanation
PAPER ERROR There is a problem with the paper.
Wrong paper size is inserted, the ink cannot be used with the selected
paper or paper output tray is open.
NO PAPER Paper is not correctly inserted or there is no paper. If the printer is
equipped with a photo paper cassette, specify the paper feed location
using the Paper Feed switch.
PAPER JAM The paper jammed during printing. Select [STOP] to cancel printing.
After removing the paper, set some paper again and press the resume
button on the printer.
PAPER HAS BEEN
CHANGED
Paper size has been changed between print setting and start of printing.
MEDIA TYPE ERROR You attempted to use a paper size/type that is not supported by the
printer.
INCOMPATIBLE PAPER
SIZE
You attempted to print on paper that cannot be used with the camcorder.
INK ERROR There is a problem with the ink.
Message Explanation
OPTURA 600_NTSC-E.book Page 131 Friday, June 3, 2005 9:27 AM