Filter
Top Products
102
Converting Analog Signals into Digital
Signals (Analog-Digital Converter)
By connecting the camcorder to a VCR or 8mm video camcorder, you can convert analog
video/audio signals to digital signals and output the digital signals via the DV terminal.
The DV terminal serves as output terminal only.
Connecting the Devices
Turn off all devices before starting the connections. Unload the tape from the camcorder.
Check the direction before connecting the DV cable. Refer also to the instruction manual
of the connected device.
You can also connect a VCR with S (S1)-VIDEO terminal ( 39).
AUDIO
VIDEO
R
L
Signal flow
Commercially available DV cable
Signal flow
Digital video device
MTC-100 Multi Cable
(Supplied)
OPTURA 600_NTSC-E.book Page 102 Friday, June 3, 2005 9:27 AM