Filter
Top Products
87
Advanced Functions
Digital Camera Functions
E
Changing the Focusing Mode
You can change the AF (autofocus) frame selection mode.
1. Set the camcorder to
CAMERA•
mode.
2. Set the mode dial to a mode other than .
• The setting differs depending on the position of the mode dial.
: 9 Point AiAF
, , , , , *: 9 Point AiAF or Center point
, , : 9 AF frames selection
* Focusing method cannot be changed in the Fireworks mode (SCN).
3. Turn the SET dial to select the focusing mode.
• With [9 Point AiAF] a large frame displays on the screen. (The frame does not
display in AUTO mode.)
• With [Center point] a frame displays in the center of the screen.
• With [9 AF frames selection]: 9 frames display on the screen. Turn the SET dial to
select the AF frame from the 9 frames.
4. Press the PHOTO button halfway.
5. Press the PHOTO button fully.
You cannot select the AF frame during recording in Stitch Assist mode.
9 Point AiAF
(Auto selection)
Depending on the shooting conditions, an AF frame is
automatically selected from the 9 frames and focused.
Center point Of 9 AF frames, the center one is selected to focus. This is
convenient for making sure the focus is exactly where you
want it.
9 AF frames selection Focuses the area within the AF frame selected from the 9
frames.
OPTURA 600_NTSC-E.book Page 87 Friday, June 3, 2005 9:27 AM