Filter
Top Products
21
Preparation
E
Step 3: Inserting a Memory Card
This camcorder is for use with SD Memory Cards only.
Inserting the Card
1. Set the POWER switch to OFF.
2. Open the cover.
3. Insert the memory card straight all
the way into the memory card slot.
4. Close the cover.
Do not close the cover forcefully without
having the card correctly inserted.
Removing the Card
Do not forcefully remove the memory card without first pushing it in.
1. Turn off the camcorder.
Make sure that the card access indicator
is not flashing before you turn off the
camcorder.
2. Open the cover.
3. Push the memory card to release
it. Remove the memory card.
4. Close the cover.
If you use memory cards other than the supplied one, make sure to format them
with the camcorder ( 96).
The SD Memory Card has a protect switch to prevent
accidental erasure. When the protect switch is set to
LOCK, you cannot record images on the memory card or
format it. If you wish to do either, change the position of
the protect switch.
Proper operation cannot be guaranteed for all memory
cards.
Card access
indicator
Protect switch
OPTURA 600_NTSC-E.book Page 21 Friday, June 3, 2005 9:27 AM