Canon 8599B001 Digital Camera User Manual


  Open as PDF
of 151
 
100
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
Cover
AdvancedGuide
6
Wi-FiFunctions
• The following Windows settings are congured when you run the utility in step 2.
- Turn on media streaming.
This will enable the camera to nd the computer to access via Wi-Fi.
- Turn on network discovery.
This will enable the computer to nd the camera.
- Turn on ICMP (Internet Control Message Protocol).
This allows you to check the network connection status.
- Enable Universal Plug & Play (UPnP).
This will enable network devices to detect each other automatically.
• Some security software may prevent you from completing the settings as
described here. Check the settings of your security software.
Adding a Computer
Add a computer to your list of devices to connect to via Wi-Fi.
Follow these instructions when using a Wi-Fi Protected Setup (WPS)
compatible access point to establish a push-button connection.
If your access point is not WPS-compatible, establish a connection as
described in “Connecting to Access Points in the List” (=
102).
• WPS makes it easy to complete settings when connecting devices over Wi-Fi.
You can use either Push Button Conguration Method or PIN Method for
settings on a WPS supported device.
• Refer to the user guide provided with your access point to check if it supports
WPS.
• Be sure to also read the user guide included with your access point.
1 AccesstheWi-Fimenu.
Press the <o> button.
2 Chooseacomputer.
Press the <o><p><q><r> buttons to
choose [
], and then press the <m>
button.
3 Choose[AddaDevice].
Press the <o><p> buttons to choose
[Add a Device], and then press the <m>
button.
A list of detected access points will be
displayed in the [Select Network] screen.
4 Choose[WPSConnection].
Press the <o><p> buttons to choose
[WPS Connection], and then press the
<m> button.
5 Choose[PBCMethod].
Press the <o><p> buttons to choose
[PBC Method], and then press the <m>
button.
 previous next