Canon 8599B001 Digital Camera User Manual


  Open as PDF
of 151
 
56
1
2
3
4
5
6
7
8
9
Cover
PreliminaryNotesand
LegalInformation
Contents:
BasicOperations
AdvancedGuide
CameraBasics
SmartAuto
Mode
OtherShooting
Modes
PMode
Wi-FiFunctions
SettingMenu
Accessories
Appendix
Index
BasicGuide
PlaybackMode
2 Composetheshotandpress
theshutterbuttonhalfway.
Make sure a green frame is displayed
around the face you focus on and white
frames around other faces.
3 Presstheshutterbuttonallthe
waydown.
The camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
The lamp blinks and the self-timer sound
is played.
4 Jointhesubjectsinthe
shootingareaandlookatthe
camera.
After the camera detects a new face, the
lamp blinking and self-timer sound will
speed up. (When the ash res, the lamp
will remain lit.) About two seconds later,
the camera will shoot.
To cancel shooting after you have
triggered the self-timer, press the
<n> button.
• Even if your face is not detected after you join the others in the shooting area,
the camera will shoot about 15 seconds later.
• To change the number of shots, press the <o><p> buttons after choosing
[
] in step 1. [Blink Detection] (=
45) is only available for the nal shot.
Still Images
Shooting Long Exposures (Long Shutter)
Specify a shutter speed of 1 – 15 seconds to shoot long exposures. In this
case, mount the camera on a tripod or take other measures to prevent
camera shake.
1 Choose[N].
Follow steps 1 – 2 in “Specic Scenes”
(=
49) and choose [N].
2 Choosetheshutterspeed.
Press the <o> button, press the
<q><r> buttons to choose the shutter
speed, and then press the <m> button.
3 Checktheexposure.
Press the shutter button halfway to view
the exposure for your selected shutter
speed.
4 Shoot.
•On-screen image brightness in step 3, when you pressed the
shutter button halfway, may not match the brightness of your shots.
•With shutter speeds of 1.3 seconds or slower, there will be a delay
before you can shoot again, as the camera processes images to
reduce noise.
•Set [IS Mode] to [Off] when using a tripod or other means to hold the
camera still (=
69).
 previous next