Filter
Top Products
Printing Maintenance
61
It takes about four minutes to complete printing. Do not open the Top
Cover while printing.
Clicking Check Setting prints the current settings and finishes the print
head alignment.
4 Check the printed pattern.
If the pattern is printed as shown below, the Print Head is aligned automatically. The
printer is now ready to use.
z If the pattern is not printed successfully, refer to “Eleven flashes” in
“Handling Error Messages” on page 77.
z If results of Automatic Print Head Alignment are not satisfactory, refer
to “Routine Maintenance” of the
User’s Guide
and align the Print Head
manually.
z The pattern is printed in black and blue.
(3) Read the message and click Print
Head Alignment.