Filter
Top Products
99
Shooting – Selecting Particular Effects
Changing the ISO Speed
Raise the ISO speed to prevent camera shake when shooting in
dark places, when you want to shoot without the flash or with a
faster shutter speed.
Mode Dial
1
Press the FUNC. button and select
*
(LCD monitor/Viewfinder) or
*
(Display Panel) using the S
or T arrow on the omni selector.
* The current setting is displayed.
z The ISO speed setting menu appears on
the LCD monitor (or in the viewfinder).
2
Select the desired setting using
the main dial or the W or X arrow
on the omni selector.
z You can shoot the image right after
selecting settings by pressing the shutter
button. The menu displays again after the
shot, allowing you to change the settings
easily.
3
Press the FUNC. button or click the main dial.
z Higher ISO speeds increase the image noise. To take clean
images, use as low an ISO speed as possible.
z The AUTO setting selects the optimal ISO speed. It will
automatically raise the speed when the light from the flash is
insufficient to illuminate the subject matter.