Filter
Top Products
77
Shooting – Letting the Camera Select Settings
Self-Timer
You can take pictures with the self-timer in any shooting mode.
Setting the Number of Seconds until Shooting
You can set the number of seconds from the time the shutter button
is pressed to the time the image is shot to 10 seconds or 2 seconds.
1
Press the button.
z Press the button until appears
on the display panel and or
appears on the LCD monitor (or in the
viewfinder).
z You can cancel the self-timer by pressing
the button again.
2
Shoot the image.
z When the self-timer is set to 10 seconds, the self-timer sounds and
the self-timer lamp starts blinking when the shutter button is
pressed all the way. The blinking gets faster two seconds before
the shutter activates.
z When the self-timer is set to 2 seconds, the self-timer lamp blinks
fast from the beginning. The shutter activates in two seconds.
z Shooting procedures are the same as for the mode (p. 53).
z You can change the self-timer sound by changing the setting in
[Selftimer Sound] in the [ (My Camera)] menu (p. 51).
1
Select [Self-timer] from the [
(Rec.)] menu.
z See Selecting Menus and Settings
(p. 44).
2
Select [ ] (10 seconds) or [ ] (2
seconds) and press the MENU
button.