Canon PC1057 Digital Camera User Manual


 
153
Connecting
A video-compatible television connected via the supplied AV cable
AVC-DC300 can be used to view images as you shoot or replay them.
Viewing Images on a TV Set
1
Turn off the camera (p. 30).
z Also turn the television off.
2
Attach AV Cable AVC-DC300 to
the A/V OUT terminal on the
camera.
3
Plug the other ends of the AV
cable to the video in and audio in
jacks on the TV.
4
Turn on the TV and switch it to Video mode.
5
Turn the mode lever to or (p. 29, 30).
z The image will appear on the TV. Shoot or play back images as
usual.
z No image will appear on the LCD monitor (or in the viewfinder)
when the camera is connected to a TV monitor.
z The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 50). The default
setting will vary between regions.
NTSC: Japan, U.S.A., Canada, Taiwan, etc.
PAL: Europe, Asia (excluding Taiwan), Oceania, etc.
If an incorrect video system is set, the output image will not
display properly.
z If the TV is a stereo model, you can plug the audio plug into
either the left or right Audio In jack. Please refer to the TV’s
manual for details.
z A TV set cannot be used in mode.
To the Video
In Jack
To the Audio
In Jack
Black
Plug
Yellow
Plug