Filter
Top Products
55
Shooting – Letting the Camera Select Settings
z Switching between the LCD Monitor and Viewfinder
While the Image is Displayed
You can switch between the LCD monitor and viewfinder by
pressing the button. Using this feature, you can shoot an image
using the viewfinder and automatically let the camera display the
image on the LCD monitor (or vice versa).
From the next shooting session and onward, review images will
automatically appear on the LCD monitor.
zIf you press the button to change the monitor while shooting,
this setting will be canceled.
Changing the Recording Format Right after
Shooting
By following the instructions below, you can save images shot in the
JPEG format in the RAW format (p. 60) right after shooting.*
You can easily process images saved in the RAW format using a
computer to edit the resolution, photo effect and white balance
without any loss of quality.
* The JPEG format image will not be saved.
1
Shoot an image using the viewfinder.
2
Pause the image by pressing the SET button.
The shot image continues to appear in the viewfinder.
3
Press the button.
The display will switch to the LCD monitor and you can review the
image.
z You can perform the following while images are displayed.
• Erasing images individually (p. 138)
• Displaying images in Detailed Display mode (p. 34)
• Changing the recording format (p. 60)
• Attaching sound memos (p. 131)
Mode Dial