Canon PC1057 Digital Camera User Manual


 
143
Print Order, Transferring
z When the print type (p. 144) is set to
[Index], select an image using the main
dial or the W or X arrow on the omni
selector and mark or remove marks from
images using the S or T arrow on the
omni selector. A check mark appears on
the marked image.
z You can use the same procedures to
select images in index playback (3
images). Press the button to switch
between single image playback and
index playback.
All the Images on a CF Card
z Press the button to switch to index
playback (3 images).
z You can set one copy of each image to
print by pressing the SET button, then
selecting [Mark all] using the S or T
arrow on the omni selector, and pressing
the SET button again.
z When the print type is set to [Standard] or
[Both], the setting for the number of print
copies can be changed for each image.
When [Index] is selected, the print
settings can be deleted. For the
instructions on changing settings, please
reread Step 3 from the beginning.
z You can cancel all the settings by
selecting [Clear all].
4
Press the MENU button.
z The selection mode will turn off and the Print Order menu will
reappear.
z Images are printed in order from oldest to newest by the shooting
date.
z A maximum of 998 images can be marked per CF card.
z When [Print Type] is set to [Both], the number of copies can be
set. When it is set to [Index], the number of copies cannot be set
(only one copy will be printed).
z Print settings can also be assigned to images with the supplied
software programs on a computer.