Canon PC1057 Digital Camera User Manual


 
31
Preparing the Camera, Basic Functions
Turning on the camera without the start-up sound and
image
Press and hold the button, then turn on the power. You can also
turn the camera on with the LCD monitor closed.
Power Saving Function
This camera is equipped with a power saving function. When this
function is turned on and it activates, restore power by turning the
mode lever toward or .
Switching between Shooting and Playback
You can quickly switch between Shooting mode and Playback
mode. This is convenient when you wish to shoot again after
checking or erasing an image immediately after it is shot.
z Shooting Mode Playback Mode
Turn the mode lever to (Playback) while pressing the release
button (p. 30).
zThe camera switches to Playback mode. In this case, the lens
does not retract. (If the mode lever is turned to (Playback)
again, the lens retracts.)
z Playback Mode Shooting Mode
Remove the lens cap and press the shutter button halfway, or turn
the mode lever to (Shooting) while pressing the release button
(p. 29).
Shooting Mode: Powers down approximately 3 minutes after the
last control is accessed on the camera.
The LCD monitor (or viewfinder) also shuts off approximately 1
minute
*
after the last control is accessed on the camera. Press any
button except the mode lever to turn the LCD monitor (or viewfinder)
back on.
* This time can be changed (p. 50).
Playback Mode: Powers down approximately 5 minutes after the
last control is accessed on the camera.
Printer Connection Mode: Powers down approximately 5 minutes
after the last control is accessed on the camera or connected printer.
zThe power saving function is disabled while a slide show plays on
the camera or during a computer connection (p. 133, 149).
zYou can turn off the power saving function in the Set up menu
(p. 50).