Canon PC1057 Digital Camera User Manual


 
Shooting Panoramic Images (Stitch Assist) (continued)
70
3
Shoot the first image.
z The exposure and white balance settings are set and locked with
the first image.
4
Compose and shoot the second image so that it
overlaps the first.
z Minor discrepancies in the overlap can be corrected with the
software.
z An image can be retaken. Press the W or X arrow on the omni
selector to return to that frame.
5
Use the same procedures to shoot the remaining
frames.
z A maximum of 26 images can be recorded either horizontally or
vertically.
6
Press the SET button after the last shot.
z A custom white balance setting (p. 94) cannot be set in
mode. To use a custom white balance setting, first set it in
another shooting mode.
z The settings in place for the first image are locked in and cannot
be changed for subsequent shots.
z A TV cannot be used as the monitor for shooting in this mode.
z See page 202 for settings that can be changed in this mode.
Sequence Sequence