Filter
Top Products
102
Printing
Connecting a Printer
You can make clear prints swiftly and easily when you connect the
camera to a direct print function compatible printer (CP series, sold
separately) or a direct print function compatible Bubble Jet printer (sold
separately). You can also print using DPOF print settings.
You are recommended to use the optional AC Adapter Kit
ACK500 (sold separately) rather than the battery pack to
power the camera when it is connected to a printer. If you do
use a battery pack, ensure that it is fully charged and monitor
the battery charge while printing.
• Please see the System Map supplied with your camera for
information on direct print function compatible printers
(CP series).
• Please see your printer’s user guide for information about
installing paper and ink cassettes/tanks.
Connecting to a Direct Print Function Compatible Printer (CP Series)
Your printer should come equipped with two direct interface cables. To
connect to this camera, please use the cable (DIF-100) that has the
symbol on its connector.
• Attach the power cable to the printer
and insert its plug into a power outlet.
• You can also power the printer with a
rechargeable battery if it is so equipped.
Please see your printer’s user guide.
Shut the camera’s
power off (p. 26).
To a Power Outlet