Filter
Top Products
118
Printing
• To include the date in the prints, set the Date setting in the Set up menu
in Step 1 above to [On]. You cannot set the date to print with the Style
menu in Step 2 above. Please note however, that the date will not print
if the print type is set to Index even if it is turned On in Step 1.
• When the print type is set to [Both], it is possible to have both the [Date]
and [File No.] options set to [On], but only the file number will print on
the Index print.
(Bubble Jet printers cannot print the date or
file number on Index prints.)
• When the print type is set to [Standard], file numbers will not be
printed even if they are set to [On].
• The maximum number of images printed on one page in the Index
print type depends upon the selected paper size.
- Card Size: 20 images
- L Size: 42 images
- Postcard Size: 63 images
(Please refer to your Bubble Jet Printer Quick Start Guide for an
explanation of the number of images printed with a Bubble Jet Printer.)
• Canceling Printing
See page 106.
• Restarting Printing
In the Print Order menu, use the
or button to select [Resume] and
press the
button. The remainder of the selected images will print.
Printing cannot be resumed under the following circumstances:
- If the print settings were changed before printing is restarted,
- If images with print settings were deleted before printing is restarted,
- If there was insufficient spare capacity on the CF card when printing
was halted.
Under these circumstances, you can select [OK] in the Print menu and
reprint starting from the first image.
If printing was stopped because of a low battery charge, you are
recommended to resume printing using the AC Adapter Kit
ACK500 (sold separately). If you do use a battery pack, ensure
that it is fully charged. Remember to turn the camera power on
again before printing.
• Printing Errors
See page 106.