Filter
Top Products
22
Preparing the Camera
2
1
Installing a CF Card
Turn the camera power off and insert the CF card with the following
procedures.
• Slide the lock up and open the CF card
slot cover.
• Insert the CF card with its label facing
upward until the CF card eject button
fully extends. Close the CF card slot
cover.
• To remove the CF card, push the eject
button and pull the CF card out.
CF Card Eject Button
• Since the camera is writing, reading, erasing or transmitting
data to or from the CF card when the indicator blinks green,
never perform the following actions during this time. It
could corrupt the image data.
- Subject the camera body to vibration or shocks.
- Turn the camera’s power off, or open the battery cover
or CF card slot cover.
• Please note that CF cards formatted with other manufacturers’
cameras or a computer, or formatted or edited with application
programs, may not operate correctly in the camera.
• You are recommended to use CF cards that have been
formatted in your camera (p. 97). The card supplied with the
camera may be used without further formatting.
Label