Filter
Top Products
26
Basic Functions
Turning the Power On / Off
• Press the ON/OFF Button until the
green power lamp lights.
- The lens extends outward when the
mode switch is set to
.
- The lens retracts approximately 1
minute after sliding the mode switch
from
to .
- When the mode switch is set to
,
the upper indicator beside the
viewfinder will flash green and the
LCD monitor will turn on.
• Press the ON/OFF Button again to turn
off the power.
• The Date/Time menu will appear the first time the camera
power is turned on or whenever the charge of the built-in
rechargeable lithium date/time battery is low. Reset the
date and time when this occurs (p. 23).
• If the Auto Power Down function activates, press the ON/
OFF Button to restore power.
• The start-up sound will sound and the start-up image will
display in the LCD monitor when the power is turned on.
(To change the start-up sound and image, see pp. 27, 45,
133.)
• The start-up image does not display when the LCD monitor
is turned off in shooting mode or when the camera is
connected to a TV via the A/V OUT terminal.
Power Lamp