Filter
Top Products
Shooting
67
Locking the Flash Exposure Setting (FE Lock)
You can lock the flash exposure so that the exposure settings are
correctly set for a particular portion of your subject.
• Turn on the LCD monitor.
• Set the flash to
and focus on the
part of the subject on which you wish
to lock the flash exposure setting.
• Press the shutter button halfway and
wait until two beeps sound.
• Without releasing your finger, press the
button.
• The flash will fire a pre-flash and lock
the flash exposure to the required
intensity to illuminate the subject.
• The
icon will display.
• Re-aim the camera to compose the shot
and press the shutter button all the
way.
• To release the FE lock, press the
button.
The FE lock may also release if you press any button other
than the
button.