Filter
Top Products
Appendices
147
Problem Cause Solution
A red band
appears on the
LCD monitor
White dots appear
on the image
Flash does not fire
Image not
showing on TV
monitor
Zoom does not
work
Reading images
from CF card is
slow
Recording images
to CF card takes a
long time
•
This is a normal occurrence in
devices containing CCDs and
does not constitute a malfunction.
(This red bar of light will not be
recorded when shooting still
photos, but it will be recorded
when shooting movies.)
• This is a phenomenon that
occurs with digital cameras and
does not constitute a
malfunction.
• Set the flash to on.
• Set the video system to the
appropriate setting, NTSC or
PAL, for your TV (p. 133).
• The output will not appear on a
TV in (Stitch Assist) mode.
Shoot in a different mode.
• Adjust the zoom before
shooting a movie.
• Use a CF card formatted in your
camera. See Formatting CF
Cards (p. 97).
Subject is too
bright
Light from the flash
has reflected off dust
particles or insects in
the air. This occurs
more frequently
w
hen shooting at
the wide-angle end.
Flash is set to off
Incorrect video
system setting
Shooting mode set
to (Stitch Assist)
Zoom lever
pressed during
movie recording
CF card was
formatted in
another device