Filter
Top Products
Printing
103
• Attach the direct interface cable to the
printer.
• Open the camera’s terminal cover and
insert the cable’s connector into the
camera’s DIGITAL terminal. Orient the
cable so that the connector’s
symbol faces the camera’s back panel.
• Press the printer’s ON/OFF button to
turn on its power. (If you are using Card
Photo Printer CP-10, the printer’s power
will turn on in Step 2 when printer and
power cable are connected.)
• Set the mode switch to the
position
and turn on the camera’s power.
•
will display when the printer is
correctly connected.
Connecting to a Bubble Jet Printer
Please read the Quick Start Guide supplied with your Bubble
Jet printer to see if it is compatible with the camera’s direct
print function, and for instructions regarding the connection
cables and the printer’s general operation.
Direct Interface
Cable (DIF-100)
This shows when a
direct print function
compatible printer is
connected.
Shut the camera’s
power off (p. 26).