Filter
Top Products
140
List of Menu Options and Messages
List of Messages Displayed while a Direct Print Function
Compatible Bubble Jet Printer is Connected
The following messages may appear on the camera’s LCD monitor while a direct
print function compatible Bubble Jet printer (sold separately) is connected.
On Bubble Jet Printers with operation panels, check the error
number displayed on the panel and refer to the Bubble Jet Printer
Quick Start Guide.
Printer in use Printer is busy printing from a memory
card in computer or printer. Printer will
automatically start printing from camera
when the current print queue empties.
Printer warming up Printer is warming up. When it is ready,
the printer will start printing automatically.
No printhead No printhead installed in printer.
Printer cover open Secure the printer front cover.
Media type error You selected a paper type incompatible
with the printer. Select a compatible
paper type in the Print Style menu.
Paper lever error Adjust the paper thickness lever to the
proper position.
Low ink level Ink tank needs replacement soon.
Prepare a new ink tank. Select [Continue]
in the error message to resume printing.
(This message will not appear on some
models.)
Waste tank full Restart printing by pressing RESUME/
CANCEL button on printer, but request
a replacement waste ink tank from a
service center (see printer Quick Start
Guide or the Contact List provided with
the printer) soon.
Printer error Turn printer off and on again. If error
persists, consult service center listed in
printer Quick Start Guide or in the
Contact List provided with the printer.