Canon VB150 Security Camera User Manual


 
Appendix
Router Router
VB150
Viewer PC
Viewer PC
Server
Provide the appropriate
server as required:
HTTP (WWW)
SMTP (mail)
Syslog (log)
V
B
1
5
0
Call 123-4567
192.168.101.2 is set.
VB150
Modem card
Insert modem card.
Viewer PC
Modem
PPP local : 192.168.101.1
PPP remote : 192.168.101.2
Public switched
telephone network
V
B
1
5
0
Sample Dialup Environment Configuration
This example shows the VB150 connected to a LAN by Ethernet. In this configuration, video can
be seen by viewers in the same Ethernet segment as the VB150 and by viewers with access to
that segment.
To send log information such as faults and access statuses by e-mail and save that information to
another computer, an SMTP server or a Syslog server is required.
This example shows the VB150 connected in a dialup environment. In this configuration, video
can be accessed by viewers which can dial up to the VB150 using a modem.
In this situation, a modem card must be inserted into the card slot (use an operation-confirmed
modem card). PPP (Point to Point Protocol) is used as the network protocol. For information on
settings, refer to Chapter 3 (P.33).
Sample Network Configurations
This section describes some typical installation modes for the VB150.
Be sure to assign a fixed IP address on the VB150.
Sample LAN Environment Configuration
104