Filter
Top Products
VB Administration Tools
4
84
In this procedure, you display the location where you want to detect motions by selecting a preset,
and then set the detection area on the video display area. You cannot specify a random location
other than the presets.
c
Note
To control the camera to the location other than those registered in presets,
choose "-Not Specified-" in the "Detection preset selection box".
Motion Detection Setting Tool
A quick and convenient way of setting multiple
schedules with the same detection settings
(Sensitivity, Area Ratio, Duration) is to copy and
paste the settings using “Copy Motion Detection
Parameters” and “Paste Motion Detection
Parameters” in the Edit menu.
Setting the detection location and area
1
Select the registered preset name in the
“Detection preset selection box”. The available
presets must be registered beforehand using the
Preset Setting Tool (→ P.75).
To Make Settings...
2
To set the detection area on the video display
area, drag the motion detection area frame to
move the frame or change its shape. To change
the shape of the frame, drag the square black
buttons (■) on each corner. To move the frame,
click inside the frame and drag.