Filter
Top Products
Detail Settings
3
Picture Recording and Output: by
Schedule
Use this setting to operate the picture
recording function based on a schedule set
beforehand. For a detailed example of actual
operation, see "dPicture Recording User's
Guide" (→ P.3).
"Schedule 1 to 4"
Up to 4 schedules can be specified.
"Record pictures"
When this option is ticked, picture
recording is performed based on the
settings below.
"Camera Position"
Selects the camera angle used for picture
recording. Select "Not Specified", "Home
1" to "Home 4" or "Preset 1" to "Preset 8".
"Camera Stabilization Time (sec.)"
When the camera moves to the specified
position, this setting specifies the delay
time for the camera to stabilize before still
picture is captured.
"Output to External Device 1/2"
Select this check box if output to external
device 1/2 is to occur at the time given
below.
"Output Time (sec.)"
Sets the duration for which output is ON at
the specified time. If zero is specified,
output is only ON momentarily.
"Start Time"
Sets the start time for picture recording
and output to an external device triggered
by the schedule.
"Apply the following repetition options at
start time"
Picture recording and output to the
external device after the Start Time is
repeated at the number of times specified
in "Repetition interval(min.)" and "No. of
repetitions".
Specify "No. of repetitions" between 1 and
60 at the interval.
Specify "Repetition interval(min.)"
between 1 and 10 minutes.
Click the [OK] button to change the settings. To discard the changes, click the
[Cancel] button. This returns you to the settings title page.
e
Tip
●
In Windows is being used, multiple numbers of schedule start times can be
selected by clicking while holding down the Ctrl key. A series of items can be
selected by pressing SHIFT while clicking on the first and last item in the series.
For example, it is possible to set the schedule "from the 10th to the 15th of
February and March at 10 and 30minutes past every hour". However, the selection
method varies with the environment being used.
●
When the start time comes, the repetitions that started at the previous
start time are stopped even when the number of repetitions has not yet
been reached.
●
If a camera position is specified and the camera cannot be moved to that
position, no picture is recorded. Note that this may result in no picture
being recorded when the camera is controlled using the Admin Viewer, for
example.
Detail Settings
50