Filter
Top Products
VB Administration Tools
4
88
Saving Settings to the VB150
The specified settings function initially by being saved to the VB150.
Setting the Frame Rate
You can set the frame rate for motion detection processing in the Motion Detection Setting Tool
and the motion detection module on the VB150. Setting a slow frame rate is effective for detecting
slowly moving objects.
c
Note
● When the network load is high, the specified frame rate may not be
achieved.
● The frame rate specified in the "Maximum Frame Rate" (→ P.54) must be
higher than the one specified using this tool.
Motion Detection Setting Tool
Select the “Enable frame rate setting” checkbox and
set a value between 0.5 and 30.0 fps as the “Frame
rate”. The “Update frame rate display every” setting
determines the frequency with which the frame rate
shown in the Status bar is updated. Set an interval
between 1 and 10 seconds.
2
To Make Settings...
Select “Options” in the “View” menu.
1
Click the “Save Settings” button. Check the Status
bar to determine whether the settings were saved
correctly.
e
Tip
● When a slow frame rate is set, motion detection is applied to images
sampled from the captured video. In this way, motion can be detected even
in slowly moving objects.
● The frame rate specified above only applies to motion detection. For the
Viewer for PC, Viewer for Java, Admin Viewer etc., the frame rate specified
in "Max Frame Rate" (→ P.54) is applied.