Filter
Top Products
Detail Settings
3
Detail Settings
36
Ethernet
"Use Ethernet"
Tick this checkbox to use Ethernet.
"IP Address"
Enter a network interface-specific IP
address.
"Subnet Mask"
Enter the subnet mask specified for the
network to be connected.
Be sure to specify the gateway address in
the Default Route field (→ P. 39).
Contact the network administrator for the
IP address, subnet mask, and default
gateway address settings.
Network Settings Page
Use this page to specify the settings for connecting to an Ethernet, Wireless LAN or PPP network.
For a LAN connection, specify Ethernet settings and for a wireless LAN connection,
specify wireless LAN settings. For connection made with a modem, specify PPP settings.
c
Note
● If you are using Ethernet, take particular care with the IP address, subnet mask and
route settings. If errors are found in any of these items, you may be completely
unable to access the VB150 via Ethernet and it may only be possible to recover the
problem by using the Initial Setup Tool (→ P.28) to correct the error.
● When you change an IP address, please re-access the Settings Title Page
with the new IP address (→ P.34).