Filter
Top Products
Capturing Panorama Pictures
c
Note
The entire panorama picture area is displayed during capturing. If the VB150
is accessed from the viewer and pictures are viewed, even when view
restrictions (→ P.41, 70) have been set, there is a possibility that third parties
that were originally not intended to see the pictures may see them. Please
keep this sufficiently in mind when capturing and displaying panorama
pictures.
To Capture...
In the Camera Selection box, select the camera to
be used for capturing, select the AE lock position
and whether or not to use backlight adjustment, then
click the Capure button.
* The following dialog appears when NU-700 (→ P.20) is
used.
The capturing process takes approximately 5 minutes in
Quick Mode and 30 minutes in High-quality Mode.
2
Capturing starts. To stop capturing while it is in
progress, click the Stop button.
1
e
Tip
Since the range that can be captured varies with the model of camera, the
display ranges of the panorama pictures are different.
VC-C4 panorama picture VC-C4R panorama picture
67