Filter
Top Products
List of Log Messages
157
8
Appendix
S070 Change to SSL certificate [info]
S220 PAN/TILT operation warning [warning]
S302 Error on saving settings [err]
S303 Error on saving settings [err]
S307 Error on saving settings [err]
S310 Working error in event service [err]
S311 Working error in external input/output service
[err]
S312 Working error in timer service [err]
S320 PAN/TILT operation error [err]
Description ssl: succeeded to %1 certificate (S070)
%1 generate | load | delete | restore
Meaning A certificate was generated/loaded/deleted/
restored
Countermeasure
None
Description %1 warning detected. [%2] (S220)
1% PAN | TILT
2% Warning details
Meaning An error occurred during operation or
stopping of PAN/TILT.
Countermeasure
Check that the camera is not touching the
dome, etc.
Description Can’t update system settings (S302)
Meaning An error generated while the system was
saving a setting. Setting could not be saved.
Countermeasure
Provide enough memory space by deleting
unnecessary files in the user memory area,
etc.
Description Can’t update files of system settings (S303)
Meaning An error generated while the system was
saving a setting. Setting could not be saved.
Countermeasure
Provide enough memory space by deleting
unnecessary files in the user memory area,
etc.
Description (vbadmin.c XXX) Can't update system
settings (S307)
Meaning An error generated while the settings were
saved by the setup protocol. Setting could
not be saved.
Countermeasure
Provide enough memory space by deleting
unnecessary files in the user memory area, etc.
Description cannot work event [%1] [%2] [%3] (S310)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An error occurred while the event service
was running.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description cannot work extio [%1] [%2] [%3] (S311)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An error occurred while the external input/
output device service was running.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description cannot work timer [%1] [%2] [%3] (S312)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An internal error occurred in the timer service.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description %1 error occurred. [%2] (S320)
1% PAN | TILT
2% Warning details
Meaning An error occurred during operation or
stopping of PAN/TILT.
Countermeasure
Check that the camera is not touching the
dome, etc.
If the error is not caused by problems such
as contact with peripheral items, the camera
needs to be serviced.