Canon VB-H41B Security Camera User Manual


 
6
The following items must be observed when using the camera.
If they are not observed, injury, death and/or property damage may occur. Read the following information carefully and
observe the instructions without fail.
Important Warnings
Safety Precautions
Caution
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The AC adapter (sold separately) can be connected to
the camera from a standard AC power outlet.
Please check your instruction manual to make sure that
your camera is compatible with this adapter.
The socket-outlet should be installed near the
equipment and should be easily accessible.
Unplug the equipment from the wall outlet before
cleaning or maintaining.
FDA regulation
This Network Camera has not been evaluated by the
Food and Drug Administration (FDA) for use as a
medical device. When incorporated into a system with
medical applications, FDA regulations may apply.
Therefore, please consult your legal advisor to
determine whether FDA regulations apply.
FCC NOTICE
Network Camera, Model Name: VB-H41/VB-H610VE/
VB-H610D/VB-H710F
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
Do not make any changes or modifications to the
equipment unless otherwise specified in the manual. If
such changes or modifications should be made, you
could be required to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Park, Melville, New York 11747, U.S.A.
Tel No. 1-800-OK-CANON (1-800-652-2666)
Canadian Radio Interference Regulations
This Class B digital apparatus complies with Canadian
ICES-003.