Filter
Top Products
158
S410 Event service initialization error [crit]
S411 External input/output service initialization error
[crit]
S412 Timer service initialization error [crit]
S413 Timer service runtime error [crit]
Camera Messages
C201 Day/Night Mode switching warning [warning]
Description event initialization error [%1] [%2] (S410)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of the
event service.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description extio initialization error [%1] [%2] (S411)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of the
external input/output device service.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description timer initialization error [%1] [%2] (S412)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of the
timer service.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description timer working error [%1] (S413)
%1 Error number
Meaning An error occurred while the timer service
was running.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description Can’t switch Day/Night mode, because
current mode is Auto. (C201)
Meaning Day/Night Mode could not be switched.
Countermeasure
Set Day/Night Mode to manual.