Filter
Top Products
101
OTHER RECORDING FUNCTIONS
Scene Number Scene Name
22
1.
Align the mode dial
with “ ”, and then
press [SET].
• This enters the BEST
SHOT mode and displays
a sample scene.
2.
Use [̇] and [̈] to select the sample scene
you want, and then press [SET].
• If you want to check which sample scene is currently
selected or if you want to change to a different
scene, press [SET] again.
3.
Record the image.
Twilight
Register User Scene (page 102)
IMPORTANT!
• BEST SHOT scenes were not recorded using this
camera. They are provided as samples only.
• Due to shooting conditions and other factors, an
image recorded using the setup of a BEST SHOT
scene may not produce exactly the results you
expect.
• You can change the camera settings that are made
when you select a BEST SHOT scene. Note,
however, that the BEST SHOT settings revert to their
defaults when you select another BEST SHOT scene
or turn off the camera. If you want to save your
settings for later use, save them as a BEST SHOT
user setup.
• Digital noise reduction processing is performed
automatically when you are recording a night scene,
fireworks, or other image that requires slow shutter
speeds. Because of this, it takes longer to record
images at lower shutter speeds. Make sure that you
do not perform any camera button operations until
the image recording operation is complete.
• When recording the image of a night scene,
fireworks, or some other image using a slow shutter
speed, use of a tripod is recommended to prevent
hand movement.