Filter
Top Products
95
OTHER RECORDING FUNCTIONS
2.
Use [̆] and [̄] to select the aperture value
(page 31) in the exposure panel, and then use
[̇] and [̈] to change the setting.
Aperture value
*
Depth of Field
Wide Small
F3.3 ‚ 3.7 ‚ 4.4 ‚ 5.2 ‚ 6.2 ‚ 7.4
Shallow
Deep
* The above values are full wide angle optical zoom.
Aperture values are different at other optical zoom
settings.
• Use [̆] and [̄] to select “ND”, and then use [̇] and
[̈] to turn the ND filter on or off (pages 30, 90).
• You could also use [̆] and [̄] to select “EV Shift”
here, and then use [̇] and [̈] to specify an
exposure compensation value (pages 31, 88).
•
If you are using manual focus
(pages 31, 86)
, you can
also use [̆] and [̄] to select “FOCUS” (manual focus
adjustment), and then use [̇] and [̈] to focus
manually.
3.
Press the shutter button half way.
• This causes the camera to configure shutter speed
automatically in accordance with the aperture value
you selected. Then it focuses the image.
• The shutter speed and aperture values on the
monitor screen will turn amber when you press the
shutter button half way if the image is over-exposed
or under-exposed.
4.
When the image is focused, press the shutter
button all the way down to record.